Knee welding 90 degrees

Description

Knee welding 90 degrees

90 degree polyethylene welding elbow is one of the widely used fittings in polyethylene pipelines, which is supplied at a 90 degree angle and at a pressure of 5 bar with PE80 material.

This connection is welded, so a polyethylene welding machine must be used for installation.

The 90 degree elbow of polyethylene welding is one of the types of polyethylene welding joints, which is used to divert the fluid inside the polyethylene pipes. Polyethylene elbows are manufactured in 45° and 90° types.

The type of connection in polyethylene knees is possible in 2 ways:

Polyethylene welding knee (45 degrees and 90 degrees) butt welding or BW, which is the simplest type of connection in the category of polyethylene joints.

Polyethylene elbows are used in all types of water supply, sewage, agriculture, and other such cases, each of which has its own load pressure.

These types of pressure are:

Welded elbow with a load pressure of 5 atmospheres, which is mostly used in the sewage category.